What Determines How Much Energy a Digital Billboard Uses?
A digital billboard’s energy use depends on its size, brightness, age, and design, and published estimates vary widely. Older figures range from about twice to roughly 30 times an average home’s yearly use, and both sides of that debate used older screens. Newer LED billboards are designed to use much less power.
That’s not a satisfying single number, but it’s the honest answer. Much of the energy debate around digital billboards still relies on figures that are more than a decade old, while the screens themselves have changed a lot.
This guide explains where those numbers came from, what actually drives a digital billboard’s power use, and what has changed in display technology.
Key Takeaways
- Published energy estimates for digital billboards vary widely, and many come from 2010 to 2016.
- Brightness is the biggest lever. Automatic dimming cuts output when the sky gets darker.
- LED efficiency, driver electronics, optics, and cooling design all affect power draw.
- Manufacturers report major efficiency gains between screen generations.
- When you see a power figure, ask what screen, what year, and what it is compared against.
Where Do the Big Energy Numbers Come From
The most widely repeated figure comes from a 2010 study by urban planner Gregory Young, published by the group Scenic America. As reported by Yale Environment 360, it found a typical digital billboard used about 30 times the energy of an average American household.
The billboard industry pushed back. A 2016 post on Billboard Insider argued the figure was far too high. It estimated that a 14 by 48 digital sign from major manufacturers used about 24,000 kilowatt-hours a year, or roughly 2 times an average home.
Both figures come from groups with a clear point of view, and both describe screens built a decade or more ago. Treat them as history, not as a measurement of the screen on your route today.
What Drives a Digital Billboard’s Power Use
Several design choices decide how much power a screen draws. Here are the big ones.
Brightness and Automatic Dimming
An LED screen uses more power the brighter it runs. Digital billboards need to be very bright in direct sun, but much less bright at night. The OAAA’s recommended brightness guidelines call for automatic dimming with a light sensor and a limit of 0.3 foot-candles over ambient light.
That means a screen spends a large share of each day running well below its maximum output. Any annual energy estimate that assumes full brightness around the clock will overstate real use.
How Efficient the LEDs Are
Newer LEDs produce more light per watt than older ones. As LED components improve, a screen can reach the same brightness on less power. This is one reason screen generations differ so much.
How the LEDs Are Driven
The electronics that power each LED matter too. In a common cathode design, each color can run at its own voltage, so red LEDs can use a lower voltage than green and blue. In one test reported by Display Daily, driver chip maker Macroblock measured 29.8 watts for a common cathode setup versus 37 watts for a standard common anode setup.
Where the Light Goes
Light that shoots above the road or off to the side is wasted. Some manufacturers shape the light so more of it reaches drivers. Formetco, for example, described a design that directs light downward toward viewers in a 2016 announcement, saying it produced brighter images without more power.
How the Screen Stays Cool
Heat is wasted energy, and fans to remove it use power of their own. Cooling design varies by manufacturer. Some use sealed enclosures that shed heat through the cabinet itself instead of relying on intake fans.
How Much Has Digital Billboard Efficiency Improved
Manufacturers have reported large gains for years. Treat these as manufacturer claims, each measured against that company’s own earlier products.
- 2010. YESCO Electronics said its digital billboards used one-fourth of the power required six years earlier, according to a company release.
- 2016. Formetco said its FTX screens produced images 30 percent or more brighter without an increase in power.
- 2024. Media Resources said its eQVISION billboards use less than 50 percent of the electricity of its previous VISIONiQ generation, in its product announcement. The company also said existing electrical service will often be enough to power the new screens.
The pattern is clear even if the exact numbers aren’t comparable. Each generation of screens has needed less power to put the same image in front of drivers.
What About Light Pollution
Energy and light pollution are related but separate issues. A screen can be efficient and still send light where it isn’t wanted. Brightness rules and automatic dimming address glare. Some manufacturers also work on where light travels.
Media Resources, for example, said its eQVISION design includes optimizations to reduce upward light emission, which contributes to sky glow. Our guide to digital billboard display rules and regulations covers how brightness is regulated.
How to Read a Digital Billboard Energy Claim
Whether you’re an advertiser, a city planner, or a neighbor, ask four questions before trusting any power figure.
- What screen? Size, pixel pitch, and model all change the answer.
- What year? A figure from 2010 describes very different technology than a screen built recently.
- What brightness? A number that assumes full brightness all day ignores automatic dimming.
- Compared to what? “Half the power” means little until you know the baseline it was measured against.
An Operator’s View of Billboard Energy
From the operator side, the biggest energy decisions happen when a screen is bought or replaced, not day to day. A newer screen that reaches the same brightness on less power cuts the cost of every hour it runs for the rest of its life.
Operators also watch the electrical service at each site. When a replacement screen draws less power, it can often run on the existing service, which makes upgrades simpler. Static boards use energy too, through the lights that illuminate them at night. Our post on how billboard lighting works covers that side.
Does Energy Use Affect Advertisers
Not directly. Your rate doesn’t rise and fall with the screen’s power bill. But brands with sustainability goals sometimes ask about it, and that’s a fair question.
- Ask your operator which screens in your plan are newer generation.
- Ask whether the screens use automatic dimming. They should.
- Ask whether the operator monitors screens remotely, which cuts unnecessary truck trips for troubleshooting.
Frequently Asked Questions
How much electricity does a digital billboard use?
It depends on size, brightness, age, and design. Older published estimates for a 14 by 48 screen range from about twice to roughly 30 times an average home’s yearly use. Newer screens are designed to use much less power.
Do digital billboards run at full brightness all the time?
No. Industry guidelines call for automatic dimming with a light sensor, and screens dim as daylight fades. They run much brighter at midday than at night, which lowers total energy use.
Are newer digital billboards more energy efficient?
Manufacturers report that they are. YESCO, Formetco, and Media Resources have each announced major efficiency gains over their earlier products, through better LEDs, electronics, optics, and cooling.
What makes one digital billboard more efficient than another?
LED efficiency, how the LEDs are driven, how well the light is aimed at viewers, cooling design, and automatic dimming all matter. A screen that puts more of its light on the road needs less power to look bright.
Do digital billboards cause light pollution?
They can if poorly controlled. Brightness limits and automatic dimming address glare, and some manufacturers design screens to reduce upward light that adds to sky glow.